Wpt pages, Rp q o – Garmin GNS 430 User Manual
Page 106
98
Airport Runway Page
The airport runway page displays runway designations, length, surface type and
lighting for the selected airport. A map image of the runway layout and surrounding area
is also displayed on the airport runway page. The map image scale appears in the lower
left corner and is adjustable using the R key. For airports with multiple runways,
information for each runway is available.
To display information for each additional runway:
1. Press the small right knob (
r
) to activate the cursor.
2a. Rotate the large right knob (
d
) to place the cursor on the runway designation field.
3. Rotate the small right knob (
a
) to display a window listing all runways for the selected
airport.
4. Continue rotating the small right knob (
a
) to select the desired runway.
5. Press
E
to display information for the selected runway on the airport runway page.
6. To remove the flashing cursor, press the small right knob (
r
).
To adjust the scale of the map image:
1. Press the down arrow side of the
R
key to display a smaller map area.
2b. Press the up arrow side of the
R
key to display a larger map area.
Runway
Designations
Airport Identifier,
Symbol and Type
Map Image
Second Page
in WPT group
Runway Surface
and Lighting
Runway Length
and Width
WPT PAGES
Airport Runways
6
r
p
q
o
a
190-00140-00.indd 98
5/7/2003, 5:17:36 PM