Nav pages – Garmin GNS 430 User Manual
Page 51
43
6. To select between “bearing FROM” or “bearing TO” to the reference waypoint, rotate the small
right knob (
a
) to select the desired bearing reference and press
E
.
7. Press the small right knob (
r
) momentarily to remove the cursor from the page.
8. If “WPT” is selected as the waypoint type, you can designate any airport, NAVAID or user
waypoint as a reference waypoint. Press the small right knob (
r
), rotate the large right knob
(
d
) to highlight the waypoint identifier field, then use the small (
a
) and large (
d
) right
knobs to enter the identifier of the desired waypoint. Press
E
to confirm the selected way-
points. Press the small right knob (
r
) to remove the cursor.
Restoring Factory Settings
A “Restore Defaults?” option allows you to reset all data fi elds to their original factory
default settings. This will return the three user-selectable fi elds at the top of the page
AND the reference waypoint fi elds to default settings.
To restore the factory default settings:
1. Press
m
to display the position page options menu.
2. Rotate the large right knob (
d
) to highlight “Restore Defaults?” and press
E
.
o
u
s
NAV PAGES
Position Page
2
190-00140-00.indd 43
5/7/2003, 5:16:41 PM