Wpt pages – Garmin GNS 430 User Manual
Page 108
100
2a. Rotate the large right knob (
d
) to scroll through the list, placing the cursor on the desired
frequency. If there are more frequencies in the list than can be displayed on the screen, a scroll
bar along the right-hand side of the screen will indicate where you are within the list.
3a. Press
E
to place the selected frequency in the standby field of the COM or VLOC window.
4. To remove the flashing cursor, press the small right knob (
r
).
Some listed frequencies may include designations for limited usage, as follows:
“TX” - transmit only
“RX” - receive only
“PT” - part time frequency
If a listed frequency has sector or altitude restrictions, the frequency will be preceded
by an “Info?” designation.
To view usage restrictions for a frequency:
1. Rotate the large right knob (
d
) to place the cursor on the “Info?” designation directly to the
left of the desired frequency.
2b. Press
E
to display the restriction information.
3b. To return to the airport frequency page, press
E
.
WPT PAGES
Airport Frequencies
6
o
b
n
190-00140-00.indd 100
5/7/2003, 5:17:38 PM