Wpt pages – Garmin GNS 430 User Manual
Page 123
115
To modify a user waypoint by changing reference waypoint information:
1. With the user waypoint page displayed, press the small right knob (
r
) to activate the cursor.
2. Use the small (
a
) and large (
d
) right knobs to enter the name of the desired waypoint and
press
E
.
3. Rotate the large right knob (
d
) to highlight the first reference waypoint (REF WPT) field, if you
wish to change the reference waypoint. Otherwise, continue rotating the large right knob (
d
)
to highlight the radial (RAD) or distance (DIS) field, as desired.
4. Use the small (
a
) and large (
d
) right knobs to change the identifier — if desired — of the
reference waypoint. The reference waypoint can be an airport, VOR, NDB, intersection or
another user waypoint. Press
E
to accept the selected identifier.
5. The cursor moves to the radial (RAD) field. Use the small (
a
) and large (
d
) right knobs to
change the radial from the reference waypoint, if desired. Press
E
to accept the selected
radial.
6. The cursor moves to the distance (DIS) field. Use the small (
a
) and large (
d
) right knobs
to change the distance from the reference waypoint to the new user waypoint, if desired. Press
E
to accept the selected distance.
7. The cursor moves to the “Modify?” action field. Press
E
to modify the waypoint.
8. Press the small right knob (
r
) to remove the flashing cursor.
WPT PAGES
Modifying
User Waypoints
6
NOTE
If you attempt to modify or delete a waypoint which is currently a
direct-to waypoint or the current “from” or “to” waypoint in the active
flight plan, the GNS 430 will alert you with the “Can’t change an active
waypoint” or “Waypoint is active and can’t be deleted” message. You
must first cancel the direct-to or remove the waypoint(s) from the active
flight plan before modifying or deleting the waypoint(s).
s
r
q
190-00140-00.indd 115
5/7/2003, 5:17:51 PM