Aux pages – Garmin GNS 430 User Manual
Page 169
161
AUX PAGES
Setup 2
9
Setup 2 Page: Nearest Airport Criteria
To set the minimum runway length and runway surface:
1. Select “Nearest Airport Criteria” from the setup 2 page, using the steps described on page 159.
2a. The flashing cursor highlights the runway surface field. Rotate the small right knob (
a
) to
select the desired surface. The following options are available:
• Any surface
• Hard surfaces only
• Hard / Soft surfaces
•
Water landings only
3. Press
E
to accept the runway surface selection.
4. The flashing cursor moves to the minimum runway length field. To enter a different minimum run-
way length, use the small (
a
) and large (
d
) right knobs to enter the desired length. Press
E
when finished.
Setup 2 Page: COM Configuration
To set the COM channel spacing:
1. Select “COM Configuration” from the setup 2 page, using the steps described on page 159.
2b. The flashing cursor highlights the channel spacing field. Rotate the small right knob (
a
) to
select the desired channel spacing: 8.33 kHz or 25.0 kHz. Press
E
when finished.
Restoring Factory Settings
When making changes to any setup 2 page option, a “Restore Defaults?”menu selec-
tion allows you to restore the original factory settings (for the selected option).
To restore a setup 2 option to the original factory settings:
1. Select the desired menu option from the setup 2 page, using the steps described on page 159.
2c. Press
m
to display a page options window.
3. With “Restore Defaults?” highlighted, press
E
.
o
b
q
o
a
190-00140-00.indd 161
5/7/2003, 5:18:34 PM