Garmin GNS 430 - Manual (Page 18)

10
The map page is one of six pages available under the NAV group*:
• Default NAV page • Map page
• NAVCOM page • Position page
• Satellite status page • Vertical navigation page
To select the desired NAV page, rotate the small right knob ( a ) until the desired page
is displayed.
If you are currently viewing a page which is not part of the NAV group, you can
quickly return to the NAV group using the c key.
To select the NAV group and display the default NAV page, press and hold c.
MAIN PAGE GROUPS
In addition to the NAV group of pages, additional groups of pages are available for
waypoint information (WPT), auxiliary (AUX) functions such as fl ight planning or unit
settings, and listings for nearest (NRST) airports or other facilities.
To select the desired page group, rotate the large right knob ( d ) until a page from the
desired group is displayed.
To select the desired page within the group, rotate the small right knob ( a ) until the
desired page is displayed.
The bottom right corner of the screen indi-
cates which page group is currently being
displayed (e.g., NAV or NRST), the number of
screens available within that group (indicated
by square icons) and the placement of the cur-
rent screen within that group (indicated by a
highlighted square icon). To select a different
page within the group, rotate the small right
knob (
a
).
* Seven NAV Pages are available when the
GNS 430 installation includes connection to
traffic and/or weather information sources.
See 400 Series Pilot’s Guide Addendum, part
number 190-00140-10.
TAKEOFF TOUR
NAV Pages &
Page Groups
8 available
pages (see list
on pg. 16)
6 available
pages* (see list
above)
NAV NRST
10 available
pages (see list
on pg. 94)
4 available
pages (see list
on pg. 131)
AUX WPT
190-00140-00.indd 10 5/7/2003, 5:16:13 PM