John Deere 318 - Manual (Page 78)

10. Inspect bearing, replace if necessary.
IMPORTANT: Be sure to hold shaft while removing
bearing.
11. Remove bearing using a 1 in. driver disk (A), bearing
puller attachment and a press.
M36120
-UN
-29AUG88
12. Remove three seals from housing.
M36121
-UN
-29AUG88
NOTE: Some transmissions will have bearings, while
others will have bushings.
13. Inspect trunnion bearing and control shaft bearing.
Replace if necessary.
14. Drive bearings or bushings through housing using a
13/16 in. driver disk (A) for bearings and a 7/8 in. driver
disk for bushings.
M36122
-UN
-29AUG88
IMPORTANT: Be sure to hold shaft and bearing when
removing from housing.
15. Remove motor shaft and bearing. Using a 1-in. driver
disk (A), and a press.
M36123
-UN
-29AUG88
M45,5005A,59 -19-13MAR85
M45,5005A,60 -19-11JAN85
5M3,5005K,AA -19-18DEC87
M45,5005A,62 -19-13MAR85
Transmission/Disassemble
TM1590 (17MAY95)
50-05-18
316, 318 & 420 Lawn and Garden Tractors
020895
50
05
18