John Deere 318 - Manual (Page 163)

6. Install steering tube (A) on bolts. Be sure the square
holes in the steering tube are seated on the square
shoulders of the bolts.
7. Apply multipurpose grease on retainer plate (B) and
washer.
8. Install washer.
M36856
-UN
-29AUG88
9. Install snap ring (A) on steering shaft.
10. Install steering shaft with threaded end down into
steering tube.
M36855
-UN
-29AUG88
IMPORTANT: Alignment grooves must be on only
one side of steering valve for proper
valve operation.
11. Install upper cover plate over four bolts with the
highly polished surface up.
M36854
-UN
-29AUG88
MX,15906006,33 -19-01MAR95
MX,15906006,34 -19-01MAR95
MX,15906006,35 -19-01MAR95
Steering—318 and 420/Steering Valve
TM1590 (17MAY95)
60-06-13
316, 318 & 420 Lawn and Garden Tractors
020895
60
06
13