John Deere 318 - Manual (Page 161)

36. Remove upper cover plate (four plates bonded
together).
37. Check plate surface for grooves, dents, or metal
flakes. A polished pattern due to the action of the seal is
normal.
M36854
-UN
-29AUG88
38. Remove steering shaft and snap ring (A).
39. Inspect steering shaft serrations, threads, and flats
for grooves, wear, or damage.
M36855
-UN
-29AUG88
40. Remove washer and steering tube (A).
NOTE: Steering tube and retaining plate (B) are a
matched set. If either part is worn or damaged,
both must be replaced.
M36856
-UN
-29AUG88
IMPORTANT: Hold steering tube in a soft-jaw vice.
Be careful not to crush steering tube.
41. Inspect bushing (A) for wear or damage. If bushing
replacement is necessary, straighten crimped area of
steering tube using a punch.
42. Remove bushing using a 2-jaw puller and slide
hammer.
M36857
-UN
-29AUG88
MX,15906006,26 -19-01MAR95
MX,15906006,27 -19-01MAR95
MX,15906006,28 -19-01MAR95
MX,15906006,29 -19-01MAR95
Steering—318 and 420/Steering Valve
TM1590 (17MAY95)
60-06-11
316, 318 & 420 Lawn and Garden Tractors
020895
60
06
11