Unitec POS4000 - Manual (Page 55)

P O S 4 0 0 0
Document Number: POS4010 35
Document Title: Remote Code POS4000 Installation and Operations Manual
Example to print pricing report:
[CMD]
[SET PRICES]
[2]
(password 2)
[ENTER]
[MENU UP/DOWN] until "Print Pricing Report" appears
[ENTER]
3.3.3 Set Tax Rate
This command allows you to set the tax rate used when tickets are generated. To select this
command, scroll through the system configuration secondary menu until "Set Tax Rate" is
displayed and press the [ENTER] key. Once selected you will be prompted Enter Tax Rate as
00.0%. Type in the tax rate followed by the [ENTER] key.
Example to set Tax Rate to 5.0%:
[CMD]
[SET PRICES]
[2]
(password 2)
[MENU UP/DOWN] until "Set Tax Rate" appears
[ENTER]
[5][0]
[ENTER]
3.3.4 Enable TAX Round Off
This command allows you to enable or disable tax round off. The tax round off feature is useful
when the price of a wash including taxes does not result in an even dollar amount. If tax round
off is enabled then the amount of tax will be increased or decreased by $0.01 to result in an even
price. To select this command scroll through the system configuration secondary menu until
"Enable TAX Round Off" appears, and then press [ENTER].
Once selected, you will be prompted to press [0] then [ENTER] to disable tax round off or [1]
then [ENTER] to enable tax round off.
Example to enable tax round off:
[CMD]
[SET PRICES]
[2]
(password 2)
[MENU UP/DOWN] until "Enable TAX Round Off" appears
[ENTER]
[1]
[ENTER]
Note:
The default setup is tax round off disable. This feature is typically only useful when
relatively large tax rates and/or prices are in use.
3.4 Service Routines
This command allows you to see the current system configuration and run various diagnostic
tests. To select this command, press the [CMD] key followed by the [SERVICE] key. After
entering the correct password, you can scroll through the secondary menu that follows: