Unitec POS4000 - Manual (Page 39)

P O S 4 0 0 0
Document Number: POS4010 19
Example to set Group 3 to Program 1 and options 1, 2 & 4:
[CMD]
[SYSTEM SETUP]
[3]
(password 3)
[ENTER]
[MENU UP/DOWN] until "Configure a Group" is displayed
[ENTER]
[3]
(select group #3 to configure)
[ENTER]
[Prog 1] (select wash functions in group)
[Opt 1]
[Opt 2]
[Opt 4]
[ENTER]
3.1.3 Set Code Age Warning
This command allows you to change the code age warning message printed on customer
tickets. To select this command scroll through the configuration secondary menu until "Set Code
Age Warning" is displayed and press the [ENTER] key.
Once selected, you will be prompted to Enter # of Days Good. If 0 is entered, no message will
be printed on customer tickets; entering 0 disables code age enforcement, and the code will be
good until the customer uses the code. If 1 is entered, the message will be "Code is Good One
Time Today Only". If a number between 1 and 30 is entered, the message will be "Good Once
During Next # Days".
Note that with a multiple-console configuration, when code age is changed on the master
console, it is immediately downloaded to the remote consoles.
Note: The default message is seven days.
Important:
Carwash codes are NOT automatically removed from memory when this time expires.
If you wish to enforce the code age warning, you must use the Memory
Information/Clear Old Codes command
3.1.4 Set Code Length
This command allows you to change the maximum number of digits used in codes. Larger
customer codes reduce the probability of a jackpotting of the system by guessing random
numbers. For example, if the valid codes database is filled with 5,000 carwash codes and the
code length is set to 6 (maximum code is 999990) a 10% probability of jackpotting exists, or 10
random codes would have to be tried on average to jackpot the system. With the same 5,000
valid codes but a maximum code length of 7 (maximum code is 9999990) a 1% probability of
jackpotting exists, or 100 random codes would have to be tried on average to jackpot the
Document Title: Remote Code POS4000 Installation and Operations Manual