Unitec POS4000 - Manual (Page 28)

P O S 4 0 0 0
Document Number: POS4010 8
2.2 Wiring
Figure 1. POS4000 Connections
The wall transformer plugs into a 3-prong earth grounded wall outlet, the connector at the end of
the cord attaches to the mating connector on the back of the main console. This cord connects
the power and Earth Ground connection to the Console.
You may have POS consoles set up as Primary and Remote (hard wired together), or you may
have totally separate/independent POS consoles (not wired together) issue codes to be
validated at the WSIIs. In this case, you must ensure the units have different POS IDs.
Document Title: Remote Code POS4000 Installation and Operations Manual