Rockwell Automation 1336T Wiring and Grounding Guide, (PWM) AC Drives - Manual (Page 10)

10 Rockwell Automation Publication DRIVES-IN001M-EN-P - March 2014
Preface
Recommended Cable/Wire The recommended wire and cable referenced in this publication can be obtained
from third-party companies found in our PartnerNetwork™ Encompass Program.
For further information on these suppliers and their products, follow these steps
to find recommended wire and cable for your drives.
1. Go to the Encompass website at http://www.rockwellautomation.com/
rockwellautomation/sales-partners/complementary-products/
overview.page
.
2. Under Find an Encompass Referenced Product, click FIND NOW.
3. In the Product Category pull-down list, choose Drive - Cables.
4. Click SEARCH.
General Precautions
ATTENTION: To avoid an electric shock hazard, verify that the voltage on the
bus capacitors has discharged before performing any work on the drive.
Measure the DC bus voltage at the +DC and –DC terminals of the power
terminal block. The voltage must be zero.