Rockwell Automation AutoMax ControlNet Communication Interface Module - Manual (Page 55)

AutoMax ControlNet Module Page 55
Publication number DSMBCN-UM001B-EN-P February 2003
Basic Command Set Commands
Command Function Description
02 N/A Protected Bit Write
00 N/A Protected Write
05 N/A Unprotected Bit Write
01 N/A Unprotected Read
08 N/A Unprotected Write
Figure 16 Unsolicited Basic Command Set Commands
The commands shown write directly to or read directly from file N7 on
the module. The address field is used as an offset into the file. If the
address does not exist, the module returns an error.
Unprotected writes are processed in the same manner as Protected writes.