Getting support, Reference documents, Requirements – Rockwell Automation AutoMax ControlNet Communication Interface Module User Manual
Page 10: Requirements 10
Page 10 AutoMax ControlNet Module
Publication number DSMBCN-UM001B-EN-P February 2003
Getting Support
Refer to page 79 for information on how to obtain support for the MBCN
module.
For support on the AutoMax processor or programming software, contact
Rockwell Automation or your local distributor.
Reference Documents
For information on using RSNetWorx, refer to:
• RSNetworx ControlNet Getting Results, Publication Number 9399-
CNETGR, Catalog number 9357-CNETL3
For information on ControlNet, refer to one of the following:
• ControlNet Specification, available from ControlNet International,
ate cost US$350
• IEEE 518 Guide for the Installation of Electrical Equipment to
Minimize Electrical Noise Input to Controllers
• ControlNet user manual, publication 1786-2.12
Requirements
RSNetWork for ControlNet version 3.21 and above includes support for
configuring the MBCN.
MBCN firmware version 1.10 and above requires RSNetWorx for
ControlNet for configuration.
The MBCN must be running firmware version 1.10 or above to be used
with ControlFlash.
To use the connection status information, you need RSNetWork for
ControlNet version 4.11 or above and firmware version 2.1 or above on
the MBCN.
Refer to page 73 for information on updating the firmware in the MBCN.
Refer to page 76 for information on converting a revision 1 MBCN to a
revision 2 MBCN in RSNetWorx for ControlNet.