Rockwell Automation 5370-UPK CVIM USER-PAK Option - Manual (Page 62)

Chapter 7
Creating Custom Runtime Displays
7–11
Here is an additional consideration when selecting Page Numbers :
Select at least one box: You must select at least one box to display the
viewport during run mode. Selecting no page number box prevents the
viewport from being displayed at all.
Number of Pages Available: With the USER–PAK option installed,
each runtime display has eight different pages available.
Erase Port Data
Picking the Erase Port Data box permanently removes all defined strings
from the selected viewport, and also resets all the Define Viewport
parameters to default settings.
Note: Do not pick this box if you value any portion of your viewport
strings and current
Define Viewport parameter settings.
The Erase Port Data function is useful if you want to clear all the contents
for a viewport, such as if you need to entirely redefine all strings and
settings, or if the viewport is no longer useful for your application, and you
want to free up the CVIM module memory for other purposes.
Erase Port Data box
To use the Erase Port Data function:
•
Pick the Erase Port Data box. Picking the Erase Port Data box once
displays this warning message:
•
To permanently remove the port data, pick the Erase Port Data box a
second time. If you do not want to erase the port data at this point, pick a
different menu item instead of the
Erase Port Data box.