Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 81)

Publication 1753-PM001A-EN-P - November 2005
Access Management 6-3
2. After you successfully log in with Administrator access, the
software displays the Access Management window .
The username and password are case sensitive and can contain as
many as 31 characters. You can use letters, numbers and
underscore ( _ ) characters.
At least one of the users must have Administrator privileges.
If you make changes to the user list, use the Set Accounts button to
save the changes in the controller.
The Administrator can delete access privileges of all users with the
default account access and reset the Administrator account to the
default setting of Administrator and no password (blank).
Field Description
Username Name of the user.
Password Password of the user.
The password is case sensitive.
Password Verification Verify the password specified above.
Access Type The access level of the user.
Specify Administrator, Read/Write, Read, or No Access.
IMPORTANT
Changes to access privileges can only be executed
when the controller is in the state STOP.
TIP
If battery and external power to the GuardPLC 1200
or GuardPLC 2000 controller are simultaneously off,
the controller loses all account information and
reverts to the default account.