Create user access, Create user access -2 – Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers User Manual
Page 80
Publication 1753-PM001A-EN-P - November 2005
6-2 Access Management
The following access levels are available:
Create User Access
To create a user access level:
1. Choose Online>Access Management.
If the Control Panel is open, you do not have to login.
Otherwise, the software asks you to log in
.
This access level
Allows
Administrator
• highest privileges
• manage usernames and passwords
• read data from controller
• write routines and data into controller
• force tags
• stop, start, freeze, and force a routine
• download an operating system
• reboot the controller
• change IP address and system ID
• can also login under read/write and read levels
Read/Write
• read data from controller
• write routines and data into controller
• force tags
• start, stop, freeze, and force a routine
• can also login under read level
Read
• lowest privileges
• only read data from controller