Start a routine, Start a routine -4 – Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers User Manual
Page 68
Publication 1753-UM001B-EN-P - November 2005
4-4 Check, Download, Start, and Test a Routine
updates the SRS in the controller and corrects the issue. You should
now be able to download the routine.
1. Choose Extra>Change System ID (SRS).
2. Enter the SRS and click OK.
3. Try the download again.
Start a Routine
After you successfully download a routine, you can start the routine.
From the Control Panel, choose Resource>Coldstart or use the
Coldstart button on the menu bar.
TIP
For more information on recovering from
FAILURE_STOP, refer to the GuardPLC Controller
Systems User Manual, publication number
1753-UM001.
Options
Description
Warmstart
Allows the user routine to be started by the programming terminal
and to continue with the previously saved Retain signals.
You must have Administrator or Read/Write access to initiate a
warmstart.
Coldstart
If a routine is in STOP or FREEZE mode, it can be started using this
cold start option. The cold start option re-initializes the routine and
available process values are lost.
Stop
Use this option to stop a routine that is in RUN or FREEZE mode.
or