Determine the ip address and srs of the controller – Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers User Manual
Page 31
Publication 1753-PM001A-EN-P - November 2005
Connect to the GuardPLC Controller 1-21
Determine the IP Address
and SRS of the Controller
The default IP address of a new controller is 192.168.0.99. The default
SRS of a new controller is 60000. To check the current IP address and
SRS of a controller:
1. Choose Online>Communication Settings.
2. In the MAC address field, enter the MAC address of the
controller.
The MAC address is on the sticker on the side of a GuardPLC
1200 controller, on the label positioned over both lower RJ-45
connections on GuardPLC 1600/1800 controllers and I/O, or on
the front bezel of the AB-CPU module of a GuardPLC 2000
controller.
3. Click Get.
The controller responds back with the IP address and the SRS it
is currently using.