beautypg.com

Set the system properties – Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers User Manual

Page 112

background image

Publication 1753-PM001A-EN-P - November 2005

B-6 Configure the GuardPLC OPC Server

12. Drag DO1 from the Signal Editor to the DO[01].Value signal

field.

13. Close the DO Signal Connections window and the Signal Editor.

Set the System Properties

Controller

1. Right-click COM under the GuardPLC 1600 controller tree and

choose Properties.

2. Set the IP Address to 192.168.0.99 and click OK.

3. Right-click Programming Terminal and choose Properties.

4. Set the System ID (SRS) to 5. Click OK.

5. Right-click OPC-Server and choose Properties.

TIP

There are 3 devices in our system:

• the PC running the Signal Editor,
• the OPC Server, and
• the GuardPLC controller.

All must have unique SRS numbers.

This manual is related to the following products:
See also other documents in the category Rockwell Automation Equipment: