Rockwell Automation 1738-ADNX ArmorPoint I/O DeviceNet Adapters User Manual
Page 87

Publication 1738-UM001A-EN-P - February 2005
Quick Start For the 1738-ADNX B-13
Notice that parameters 9, 10, 11 and 12 are still at their default of
2 bytes. These values will be filled out for you when this action
is complete.
4. Make sure All is selected and the Monitor value then click the
icon to download parameters to the device (this triggers the
Auto Start Mode).
5. Click the Monitor icon and notice:
• Parameter 6 has gone back to Do Nothing. The Auto Start has
begun and will not repeat unless you trigger it again later.
• Parameter 8, Phys List Acquire Status, indicates you are in Auto
Start Mode. Give the system at least a minute or two to
complete the configuration you requested then go to the next
step.
Download
parameters to
the device
Monitor
icon