Rockwell Automation MV SMC Flex Motor Controller (for Series K or later) - Manual (Page 85)

Rockwell Automation Publication 1560E-UM051F-EN-P - June 2013 75
Programming Chapter 4
Password The SMC Flex Controller allows the user to limit access to the programming
system through password protection. This feature is disabled with a factory-set
default of 0. To modify the password or login after a password is programmed,
complete the procedure below.
Description Action Display
– –
1. Press the ESC key to go from the status display to the
Main menu.
2. Scroll with the Up/Down keys until the Preferences
option is highlighted.
3. Press the Enter key to access the Preferences menu.
4. Scroll with the Up/Down keys until the Change
Password option is highlighted.
5. Press the Enter key.
6. Press the Up/Down keys to enter the desired
number. If you are modifying the password, make a
note of it as displayed.
7. Verification of the new password is required. Press
the Enter key.
8. Press the Enter key after you have completed
modifying the password.
(1)
(1) To complete the programming process, re-enter the Main Menu mode to log out. This will eliminate unauthorized process to the
programming system.
TIP If you lose or forget the password, contact your nearest Rockwell Automation
sales office. You can also call Rockwell Automation Medium Voltage Product
Support at 1-519-740-4790 for assistance.
Sel Esc