JUMO 701150 14597 safetyM STB/STW - Safety Temperature Limiter and Safety Temperature Monitor Operating Manual - Manual (Page 88)

8 Technical data 2014-05-01 88
8 Technical data
8.1 Analog inputs
RTD temperature probe
Thermocouples
Designation Measuring range Accuracy
2/3-wire circuit
1
Ambient temperature
influence
Pt100 DIN EN 60751 -200 to +850 °C 0.5% / 0.1% 50 ppm/K
Pt1000 DIN EN 60751 -200 to +850 °C 0.5% / 0.1% 50 ppm/K
Connection type 2-wire, 3-wire circuit Maximum output resistance 30 Ω
Measuring rate 210 ms
Error tolerance time ≤ 5s time taken into account for all diagnosis tests
Input filter Digital filter, 2nd priority; filter constant can be set from 0 to 100 s
Special features Individual probe Pt100 2-wire,
display can also be programmed in °F
Designation Measuring range Accuracy 1 Ambient temperature
influence
Fe-CuNi "L" DIN 43710 -200 to +900 °C 0.4% 100 ppm/K
Fe-CuNi "J" DIN EN 60584 -200 to +1200 °C 0.4% 100 ppm/K
Cu-CuNi "U" DIN 43710 -200 to +600 °C 0.4% 100 ppm/K
Cu-CuNi "T" DIN EN 60584 -200 to +400 °C 0.4% 100 ppm/K