JUMO 701150 14597 safetyM STB/STW - Safety Temperature Limiter and Safety Temperature Monitor Operating Manual - Manual (Page 85)

7 Configuration level 85 2014-05-01
7.6 Display/operation
Parameter Comment
Value range
(factory-setting in bold)
7.6.1 Language German German , English, French
English
French
7.6.2 Unit Here a unit for the measured value can be assigned. °C , °F, %, text
° C
°F
%
Text:
Via the setup program, 2 characters can be entered
here for another unit, e.g. Pa (Pascal).
7.6.3 Decimal place No decimal place No decimal place,
One decimal place
One decimal place
7.6.4 Normal display This sets the view that appears after the voltage supply
is switched on.
v Chapter “Operating overview”
Main measured value ,
measured values, limit
value, pre-alarm, difference
Main measured value
Measured values
Limit value
Pre-alarm
Difference
A When the measurement unit changes
to °F, the measured value is convert-
ed.
All other values referring to the mea-
sured value (e.g. limit value) remain in
their value!