ETC Matrix MkII Dimming System - Manual (Page 14)

Table of Contents 9
Dimmer Module User Interface
Local control for each dimmer module is included within the Processor, and no direct
access is required with the module to view and adjust settings. However, each
module includes slave indicators and an interrogation control button for convenience.
When the interrogate button is pressed (the coloured disc in the logo) the Processor
LCD panel and controls are routed to the selected module.
Each front panel has an LED per output channel to indicate when there is an output,
or if there is a fault with a channel, and when power is applied to the module, the blue
'ON' LED is lit.
Press the coloured
disc of the logo for the
module's activation
button to interrogate
this module via the
Processor LCD.
Individual status LED per channel.
Green = Output OK
Red = fault
None = no output
Power ON LED (blue)