DATOptic ARC-1680 Series - Manual (Page 95)

BIOS CONFIGURATION
95
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information System Information
The System Information
Controller Name : ARC-1680
Firmware Version : V1.43 2007-5-15
BOOT ROM Version : V1.43 2007-5-15
SAS Firmware Version : 2.1.2.4
Serial Number : 1100-2116-6633
Unit Serial # :
Main Processor : 667MHz IOP348
CPU ICache Size : 32KBytes
CPU DCache Size : 32KBytes/Write Back
CPU SCache Size : 512KBytes/Write Back
System Memory : 256MB/533MHz/ECC
Current IP Address : 192.168.0.55
3.7.10 Hardware Monitor
To view the RAID controller’s hardware monitor information, move
the cursor bar to the main menu and click the “Hardware Monitor”
link. The “Controller H/W Monitor” screen appears.
The “Controller H/W Monitor” provides the CPU temperature, con-
troller temperature, voltage and fan speed (I/O Processor fan) of
the SAS RAID controller.
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Hardware Monitor
Controller H/W Monitor
CPU Temperature : 0
Controller Temp. : 0
CPU Fan : 0 RPM
12V : 0.000
5V : 0.000
3.3V : 0.000
DDR-ll +1.8V : 1.840 V
PCI-E +1.8V : 1.840 V
CPU +1.8V : 1.840 V
CPU +1.2V : 1.200 V
DDR-ll +0.9 : 0.896V
3.7.11 System Information
Choose this option to display controller name, firmware version,
BOOT ROM version, SAS firmware version, serial number, main
processor, CPU instruction cache and data cache size, system
memory, and current IP address. To check the system informa-
tion, move the cursor bar to “System Information” item, then
press Enter key. All relevant controller information will be dis-
played.