DATOptic ARC-1680 Series - Manual (Page 118)

WEB BROWSER-BASED CONFIGURATION
118
• Start-up McRAID Storage Manager from Linux/
FreeBSD/Solaris/Mac Local Administration
To configure the internal SAS RAID controller. You need to
know its IP address. You can find the IP address assigned by
the Archttp proxy server installation:Binding IP:[X.X.X.X] and
controller listen port.
(1). Launch your McRAID storage manager by entering http://
[Computer IP Address]:[Port Number] in the web browser.
(2). When connection is established, the "System Login" screen
appears. The SAS RAID controller default User Name is “admin”
and the Password is “0000”
• Start-up McRAID Storage Manager Through Ether-
net Port (Out-of-Band)
Areca now offers an alternative means of communication for
the PCIe RAID controller – Web browser-based McRAID storage
manager program. User can access the built-in configuration
without needing system starting up running the ArcHttp proxy
sever. The web browser-based McRAID storage manager pro-
gram is an HTML-based application, which utilizes the browser
installed on your remote system.
To ensure proper communications between the PCIe RAID con-
troller and web browser-based McRAID storage manager, Please
connect the RAID controller LAN port to any LAN switch port.
The controller has embedded the TCP/IP & Web Browser-based
RAID manager in the firmware. User can remote manage the
RAID controller without adding any user specific software (plat-
form independent) via standard web browsers directly connected