DATOptic ARC-1680 Series - Manual (Page 43)

BIOS CONFIGURATION
43
Areca Technology Corporation RAID Setup
ArrowKey Or AZ:Move Cursor, Enter: Select, **** Press F10 (Tab) to Reboot ****
Select An Adapter To Configure
( 001/ 0/0) I/O=28000000h, IRQ = 9
Use the Up and Down arrow keys to select the controller you want
to configure. While the desired controller is highlighted, press the
Enter key to enter the main menu of the McBIOS RAID manager.
3.2 McBIOS RAID manager
The McBIOS RAID manager is firmware-based and is used to con-
figure RAID sets and volume sets. Because the utility resides in
the SAS RAID controller firmware, operation is independent of any
operating systems on your computer. This utility can be used to:
• Create RAID sets,
• Expand RAID sets,
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Quick Volume/Raid Setup
Verify Password
Note:
T h e m a n u f a c t u r e
default password is
set to 0000; this
p a s s w o r d c a n b e
modified by selecting
Change Password
in the Raid System
Function section.