DATOptic ARC-1680 Series - Manual (Page 23)

HARDWARE INSTALLATION
23
Tools Required
An ESD grounding strap or mat is required. Also required are stan-
dard hand tools to open your system’s case.
System Requirement
The SAS RAID controller can be installed in a universal PCIe slot
and requires a motherboard that:
ARC-1680 series SAS RAID controller requires:
• Comply with the PCIe x8
It can work on the PCIe x1, x4, x8, and x16 signal with x8 or x16
slot M/B.
Installation Tools
The following items may be needed to assist with installing the
SAS RAID controller into an available PCIe expansion slot.
• Small screwdriver
• Host system hardware manuals and manuals for the disk or
enclosure being installed.
Personal Safety Instructions
Use the following safety instructions to help you protect your
computer system from potential damage and to ensure your own
personal safety.
Warning:
High voltages may be found inside computer equipment. Before
installing any of the hardware in this package or removing the
protective covers of any computer equipment, turn off power
switches and disconnect power cords. Do not reconnect the
power cords until you have replaced the covers.