DATOptic ARC-1680 Series - Manual (Page 111)

111
ARCHTTP PROXY SERVER INSTALLATION
5.3 For FreeBSD
You must have administrative level permissions to install SAS RAID
software. This procedure assumes that the SAS RAID hardware and
FreeBSD are installed and operational in your system.
The following details the FreeBSD installation procedure of the SAS
RAID controller software.
1. Insert the RAID controller software CD in the CD-ROM drive.
2. Copy \PACKAGES\FreeBSD\http directory to local
The next following step is the same with Linux. Please see section
5.2 For Linux.
5.4 For Solaris 10 X86
Please refer to the “readme.txt“ file on the software CD or website:
http://www.areca.com.tw. The step is same with linux. Please see
section 5.2 For Linux.
5.5 For Mac OS 10.X
The ArcHttp proxy server is provided on the software CD delivered
with SATA card or download from the www.areca.com.tw. The
firmware embedded McRAID storage manager can configure and
monitor the SATA RAID controller via ArcHttp Proxy Server. The
Archttp proxy server for Mac, please reference Chapter 4.6 Driver
Installation for Mac 10.x or refer to the the Mac_manual_xxxx.
pdf that resides at CD \DOCS directory. You can install
See the next chapter detailing the McRAID Storage Manager to
customize your RAID volume set.
(3). If you need the “Cfg Assistant”, please refer to section 5.6
ArcHttp Configuration.
(4). See the next chapter detailing the McRAID storage manager
to customize your RAID volume set.
For Mozilla user:
Because our management need Java support, so user
may need upgrade to version 1.6 or later.