DATOptic ARC-1680 Series - Manual (Page 41)

HARDWARE INSTALLATION
41
McRAID Storage Manager
Before launching the firmware-embedded web server, McRAID
storage manager through the PCIe bus, you need first to install the
ArcHttp proxy server on your server system. If you need additional
information about installation and start-up of this function, see the
McRAID Storage Manager section in Chapter 6
SNMP Manager Console Integration
• Out of Band-Using LAN Port
Before launching the controller's firmware-embedded SNMP
agent, you need first to enable the firmware-embedded SNMP
agent function and install the SNMP extension agent software
on your server system. If you need additional information about
installation and start-up this function, see the section 6.8.4 SNMP
Configuration.
• In-Band-Using PCIe Bus
Before launching the SNMP agent in the sever, you need first to
enable the firmware-embedded SNMP community configuration
and install Areca SNMP extension agent in your server system.
If you need additional information about installation and start-up
the function, see the SNMP Operation & Installation section in the
Appendix C
Single Admin Portal (SAP) Monitor
This utility can scan for multiple RAID units on the network and
monitor the controller set status. For additional information, see
the utility manual (SAP) in the packaged CD or download it from
the web site http://www.areca.com.tw