Bios configuration, 4 delete pass-through disk – DATOptic ARC-1680 Series User Manual

Page 74

BIOS CONFIGURATION

3.7.4.3 Modify a Pass-Through Disk

Use this option to modify “Pass-Through Disk Attributes”. To

select and modify a pass-through disk from the pool of pass-

through disks, move the “Modify Pass-Through Drive” option and

then press the Enter key. The “Physical Drive Function” menu

will show all pass-through drive number options. Move the cur-

sor bar to the desired number and then press the Enter key to

show all pass-through disk attributes. Select the parameter from

the list to be changed and them press the Enter key to modify

it.

3.7.4.4 Delete Pass-Through Disk

I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System

ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw

Areca Technology Corporation RAID Controller

Main Menu

Quick Volume/Raid Setup

Raid Set Function

Volume Set Function

Physical Drives

Raid System Function

Hdd Power Management

Ethernet Configuration

View System Events

Clear Event Buffer

Hardware Monitor

System information

Physical Drive Information

Physical Drive Function

View Drive Information

Modify Pass-Through Disk

Delete Pass-Through Disk

Identify Selected Drive

Identify Enclosure

Create Pass-Throught

Select The Drives

E#1Solt#2 : 500.1GB : HDS725050KLA360

E#1Solt#3 : 500.1GB : ST3500630NS

E#1Solt#4 : 400.1GB : Hitachi HDT725040VLA360

E#1Solt#5 : 400.1GB : Hitachi HDT725040VLA360

E#1Solt#6 : 400.1GB : Hitachi HDT725040VLA360

E#1Solt#7 : 500.1GB : HDS725050KL360

E#1Solt#8 : 500.1GB : ST3500630NS

E#1Solt#2 : 500.1GB : HDS725050KLA360

Pass-Through Disk Attribute

SCSI ID : 0

SCSI LUN : 0

Cache Mode : Write Back

Tag Queuing : Enabled

SCSI Channel : 0

Create Pass-Through

Yes