DATOptic ARC-1680 Series - Manual (Page 113)

113
ARCHTTP PROXY SERVER INSTALLATION
the RAID controller email sending function, click on the “Mail Con-
figuration” link. The "SMTP Server Configurations" menu will show
as following:
When you open the mail configuration page, you will see following
settings:
• SMTP Server Configuration:
SMTP Server IP Address: Enter the SMTP server IP address which is
not MCRAID manager IP.Ex: 192.168.0.2
• Mail Address Configurations:
Sender Name: Enter the sender name that will be shown in the
outgoing mail.Ex: RaidController_1Mail address: Enter the sender
email that will be shown in the outgoing mail, but don’t type IP to
replace domain name. Ex: [email protected]
Account: Enter the valid account if your SMTP mail server need
authentication.
Password: Enter the valid password if your SMTP mail server need
authentication.
MailTo Name: Enter the alert receiver name that will be shown in
the outgoing mail.
Mail Address: Enter the alert receiver mail address
Ex: [email protected]
• Event Notification Configurations:
According to your requirement, set the corresponding event level :
Disable Event Notification: No event notification will be sent. Urgent