DATOptic ARC-1680 Series - Manual (Page 101)

DRIVER INSTALLATION
101
1. Follow the instructions in Chapter 2, the Hardware Installation
Chapter, to install the controller and connect the disk drives or
enclosure.
2. Start the system and then press Tab+F6 to enter the con-
troller McBIOS RAID manager. Use the configuration utility to
create the RAID set and volume set. For details, see Chapter 3,
McBIOS RAID Manager. Once a volume set is created and config-
ured, continue with installation of the driver.
3. Re-Boot Windows and the OS will recognize the SAS RAID
controller and launche the “Found New Hardware Wizard”, which
guides you in installing the SAS RAID driver.
4. The “Upgrade Device Driver Wizard” will pop-up and provide a
choice of how to proceed. Choose “Display a list of known driv-
ers for this device, so that you can choose a specific driver.” and
click on “Next”.
5. When the next screen queries the user about utilizing the cur-
rently installed driver, click on the “Have Disk” button.
6. When the “Install From Disk” dialog appears, insert the SAS
RAID controller driver diskette or the shipping software CD and
type-in or browse to the correct path for the “Copy Manufactur-
er’s Files from:” dialog box.
7. After specifying the driver location, the previous dialog box
will appear showing the selected driver to be installed. Click the
“Next” button.
8. The “Digital Signature Not Found” screen will appear. Click on
Yes to continue the installation.
9. Windows automatically copies the appropriate driver files and
rebuilds its driver database.
10. The “Found New Hardware Wizard” summary screen ap-
pears; click the “Finish” button.
11. The “System Settings Change” dialog box appears. Remove