2 for linux – DATOptic ARC-1680 Series User Manual
Page 109
109
ARCHTTP PROXY SERVER INSTALLATION
Click on the “Start” button in the Windows task bar and then
click “Program”, select the “McRAID” and run “ ArcHttp proxy
server”. The ArcHttp dialog box appears.
1. When you select “Controller#01(PCI)” then click “Start” but-
ton. Then web broswer appears.
2. If you select “Cfg Assistant” then click “Start” button. The
“ArcHttp Configuration” appears. (Please refer to section 5.6
ArcHttp Configuration)
5.2 For Linux
You should have administrative level permissions to install SATA
RAID software. This procedure assumes that the SATA RAID
hardware and Linux are installed and operational in your system.
The following details the Linux installation procedure of the SATA
RAID controller software.
The ArcHttp proxy server is provided on the software CD delivered
with SATA card or download from the www.areca.com.tw. The
firmware embedded McRAID storage manager can configure and
monitor the SATA RAID controller via ArcHttp Proxy Server.
1. Login as root. Copy the ArcHttp file to a local directory.
(1). Insert the SATA RAID controller CD in the CD-ROM drive.
(2). Copy