DATOptic ARC-1680 Series - Manual (Page 59)

BIOS CONFIGURATION
59
3.7.3 Volume Set Function
A volume set is seen by the host system as a single logical de-
vice; it is organized in a RAID level within the controller utiliz-
ing one or more physical disks. RAID level refers to the level of
data performance and protection of a volume set. A volume set
can consume all of the capacity or a portion of the available disk
capacity of a RAID set. Multiple volume sets can exist on a RAID
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid Set Function
Raid Set Function
Create Raid Set
Delete Raid Set
Expand Raid Set
Activate Raid Set
Create Hot Spare
Delete Hot Spare
Raid Set Information Raid Set Iformation
The Raid Set Information
Raid Set Name : Raid Set # 00
Member Disks : 2
Raid State : Normal
Total Capacity : 800.0GB
Free Capacity : 800.0GB
Min Member Disk Size : 400.0GB
Member Disk Channels : .E1S1.E1S2.
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Delete Raid Set
Main Menu
Quick Volume/Raid Setup
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid Set Function
Raid Set Function
Create Raid Set
Delete Raid Set
Expand Raid Set
Activate Raid Set
Create Hot Spare
Delete Hot Spare
Raid Set Information
Delete Hot Spare
Select The HotSpare Device To Be Deleted
[ ]E#1Solt#3 : 500.1GB : ST3500630NS [*]E#1Solt#3 : 500.1GB : ST3500630NS Delet HotSpare?
No
Yes
3.7.2.7 Raid Set Information
To display RAID set information, move the cursor bar to the de-
sired RAID set number, then press the Enter key. The “Raid Set
Information” will appear.
You can only view information for the RAID set in this screen.