Dascom LA48N/LA48W User Guide - Manual (Page 99)

Using Set-Up Mode
5-33
Save Settings and Exit Set-up mode
This section describes how to exit the Set-Up mode while saving any changes you
have made.
To exit the Set-Up mode with the settings saved, first select the SAVE&EXIT func-
tion and then press the button or the button.
Any settings changed while in the Set-Up mode are saved as the new power-on de-
faults for the printer. The new defaults remain active until you change them again.
CAUTION:
To temporarily use your changes, press the Set-Up/Quit button. These
changes are lost at the next power-off.
Recall Factory Settings
Factory settings are those settings preselected at the factory. To recall (reset) the fac-
tory Recalling Factory Settings
Factory settings are those settings preselected at the factory. To recall (reset) the fac-
tory settings, select the RCALL-FACT function and press the button or the
button.
Options under the MACRO, INSTALL, and ADJUST functions are all initialized to
the factory settings.