Dascom LA48N/LA48W User Guide - Manual (Page 126)

Printer and Paper Specifications
B-2
Functional Specifications
LA48N LA48W
Print method Impact dot matrix with a 0.2 mm, 24-wire head
Character cell
Letter (10 cpi)
Letter (12 cpi)
High-impact draft
Correspondence
Draft
High-speed draft
Horizontal x vertical
36 x 24 dots
30 x 24 dots
24 x 24 dots
18 x 24 dots
12 x 24 dots
0 9 x 24 dots
Paper handling
Cut sheets
Continuous forms
Friction or tractors
Friction-feed platen
Push tractors, rear feed
Paper type 1-to 5-part side-glued or paper-stapled
fanfolded continuous forms or label sheets with
sprocket holes
1-to 5-part top-glued cut sheets andenvelopes
Paper size
Cut sheets Width
Length
Continuous Width
Length
102 to 266.7 mm
(4 to 10.5 inch)
76 to 364 mm
(3 to 14.3 inch)
102 to 266.7 mm
(4 to 10.5 inch)
102 mm (4 inch) or greater 102 to 420 mm
(4 to 16.5 inch)
76 to 420 mm
(3 to 16.5 inch)
102 to 420 mm
(4 to 16.5 inch)
102 mm (4 inch) or greater
Paper thickness Up to 0.35 mm (0.014 inch)
Number of copies Up to 5, including the original
Command sets
(emulations) DEC PPL2
IBM X24E (LA48N)
IBM XL24E (LA48W)
EPSON ESC P2
Fonts 12 resident fonts available: Draft, High speed Draft,
High impact, Courier 10, Pica 10, Prestige 12, Com-
pression, Boldface PS, Timeless Normal PS, Nimbus
Sans Normal PS, OCR-A, OCR-B
Line spacing 1, 2, 3, 4, 5, 6, 7, 8 or 12 lines per inch.
Programmable in 1/360 inch or various increments for
image graphics (ESC/P2)