Dascom LA48N/LA48W User Guide - Manual (Page 91)

Using Set-Up Mode
5-25
Changing Install Options
The INSTALL function defines the printer’s installation conditions. You can select
a language from five that are used to print menu functions and options during the Set-
Up operation . You can adjust the start timing of auto loading or auto tear-off feeding.
You can also change the operation of the error beep or allocation of the input buffer.
If you are using the RS232 serial interface, you must set the serial interface options
properly for the printer to function correctly with your system hardware.
The following table describes the INSTALL options and values. Options are listed in
the order in which they are printed. The procedure for changing the INSTALL op-
tions is detailed in the early sections of this chapter.
(Epson Defaults) The following are the Set-Up options for
the Epson ESC/P2 protocol only.
(Epson Character-
Set)
USA
FRANCE
GERMANY
UK
DENMARK1
SWEDEN
ITALY
SPAIN 1
JAPAN
NORWAY
DENMARK2
SPAIN 2
LATIN AM
KOREA
LEGAL
Select a national character set.
American English
French
German
British English
Danish 1
Swedish
Italian
Spanish 1
Japanese
Norwegian
Danish 2
Spanish 2
Latin American
Korea
Legal
Macro1/Macro 2 Values Description