Dascom LA48N/LA48W User Guide - Manual (Page 66)

Printing
4-10
Removing Printed Pages
This section describes the best methods for removing single sheets or continuous
forms paper after printing.
Removing Single Sheets
When you print using software, the printer automatically ejects each sheet of paper
when the end of the printed page is reached. To eject sheets manually:
Press the FF/Load button to execute a form feed.
Removing Continuous Forms
To avoid wasting paper when removing printed continuous forms paper, use the
printer's tear-off function.
Depending on the TEAR option value of the Set-Up, the printer automatically feeds
the paper so that the perforation faces the tear bar. Tear the paper off. The paper will
automatically return to the Top-of-Form position when the printer receives data to
print.
If you have set the TEAR option to MANUAL, you have to press the Pause button
to move the paper to the tear bar, and then to return the paper to the Top-of-Form po-
sition.
NOTE:
See the section “Tearing Off Continuous Forms” in Chapter 3, “PaperHan-
dling”.