Dascom LA48N/LA48W User Guide - Manual (Page 37)

Paper Handling
3-5
Pause Advance forms to the tear
bar when forms are at the
Top-of-Form (TOF) posi-
tion. Press Pause to advance the forms
perforation to the tear bar. Tear off
the forms, then press Pause again to
return theforms to the previous posi-
tion.
Paper select
lever* Select paper path Move the paper select lever forward
for single sheets.
Move the paper select lever back-
ward for continuous forms.
Paper thick-
ness lever Adjust for paper thickness
or number of copies Select the number corresponding to
the number of copies (including the
original). Vary the setting upward or
downward (including A to D) to opti-
mize printing. Select D when replac-
ing ribbon or clearing a paper jam.
* The following graphics are engraved on the casing.
Lever/Button Purpose Action
Continuous forms
Cut sheets