Dascom LA48N/LA48W User Guide - Manual (Page 29)

Setting up the printer
2-19
Fault On The printer is out of paper.
Blinking
fast It is blinking at a 0.5 second period when paper jam,
carriage error, communication error, buffer overflow is
detected, or when the Automatic Sheet Feeder must be
active but paper can not be ejected after 22 inches
feeding, or when parking is not successful after 20
inches reverse feeding.
Blinking
slowly When the paper source in a present MACRO setting
and Setting of Paper Select Lever are different, five sec-
onds are blinked for warning.
Macro On Shows that Macro 1 is selected.
Off Shows that Macro 2 is selected.
Protocol Two indicators are available to indicate the currently
selected protocol:
DEC On The DEC ANSI protocol is active.
PPX24 On The IBM Proprinter X24E/XL24E protocol is active.
DEC +
PPX24 On The Epson ESC/P2 protocol is active.
Blinking Port dependent
Indicator Status Printer status