Dascom LA48N/LA48W User Guide - Manual (Page 34)

Paper Handling
3-2
Selecting Paper
The printer can handle either single sheets or continuous forms. Single sheets, also
called cut sheets, include envelopes and noncontinuous, multipart forms. Continu-
ous forms include labels and multipart forms fed into the printer using the forms trac-
tors.
For best results, use paper that meets the specifications listed in the following table.
(See Appendix B, “Printer and Paper Specifications” for detailed specifications.) If
you are unsure of the suitability of a particular type of paper, try testing the paper or
consult your dealer.
Paper Specifications
Paper Size
Paper Thickness and Number of Copies
LA48N LA48W
Continuous forms Width 102 to 267 mm
(4 to 10.5 in) 102 to 420 mm
(4 to 16.5 in)
Length 102 mm (4 in) or greater 102 mm (4 in) or greater
Cut sheets Width 102 to 267 mm
(4 to 10.5 in) 102 to 420 mm
(4 to 16.5 in)
Length 76 to 364 mm
(3 to 14.3 in)
76 to 420 mm
(3 to 16.5 in)
Description
Thickness 0.35 mm (0.014 in) maximum total thickness.
Copies 1 to 5 copies, including the original.
For carbon-interleaved paper, the carbon counts as a copy.