Dascom LA48N/LA48W User Guide - Manual (Page 136)

C - 4
Command Sets
Function Command
Positioning Controls
Mnemonic Function Command Remarks
BS Backspace 0/8 C0 Control Code
CR Carriage Return 0/13 C0 Control Code
FF Form Feed 0/12 C0 Control Code
HT Horizontal Tab 0/9 C0 Control Code
LF Line Feed 0/10 C0 Control Code
VT Vertical Tab 0/11 C0 Control Code
HTS Horizontal Tab Set 8/8 C1 Control Code
7-bit environment : ESC H
IND Index 8/4 C1 Control Code
7-bit environment : ESC D
NEL Next Line 8/5 C1 Control Code
7-bit environment : ESC E
PLD Partial Line Down 8/11 C1 Control Code
7-bit environment : ESC K
Advance paper 1/12 in.
PLU Partial Line Up 8/12 C1 Control Code
7-bit environment : ESC L
Reverse paper 1/12 in.
VTS Vertical Tab Set 8/10 C1 Control Code
7-bit environment : ESC J
DECCAHT Clear All ESC 2
Horizontal Tabs
DECCAVT Clear All Vertical ESC 4
Tabs
DECSHTS Set Horizontal Tab CSI Pn ;...; Pn u Pn = tabstop position
Stops
DECSVTS Set Vertical Tab CSI Pn ;...; Pn v Pn = tabstop position
Stops
DECHTS Horizontal Tab Set ESC 1
DECVTS Vertical Tab Set ESC 3
HPA Horizontal Position CSI Pn ` Pn = position to move to
Absolute