Dascom LA48N/LA48W User Guide - Manual (Page 93)

Using Set-Up Mode
5-27
ONE
CONTINUOUS
OFF
Enable or disable the printer status buzzer
when a fault condition occurs.
One beep for a period of about 500 ms
Buzzer on until the fault condition is cleared
Buzzer off under any condition
2 KBYTE
8 KBYTE
16 KBYTE
32 KBYTE
64 KBYTE
Assign buffer memory as the input buffer.
2 Kbytes
8 Kbytes
16 Kbytes
32 Kbytes
64 Kbytes
NOTE: The larger the input buffer selected,
the smaller the download buffer becomes.
Even with 64K bytes of input buffer, a minimal
download buffer is provided. If you need a
larger capacity for downloading fonts, reduce
the input buffer.
(Interface Type)
PARALLEL
SERIAL
USB
AUTO
Select the type of interface to the computer.
Centronics parallel interface
RS232 serial interface
USB interface
All interfaces are ready for communication.
The printer communicates with the interface
from which it first receives data. The interface
is active until the input buffer becomes empty.
NOTE: The interface which is not installed
(serial or USB) is shaded out in the menu
printout.
Install Options Values Description