Dascom LA48N/LA48W User Guide - Manual (Page 108)

Maintenance
6-4
4.
To remove the ribbon cartridge, press the ribbon release levers located on either
side of the cartridge and carefully lift the cartridge out of the printer.
Removing the ribbon cartridge
5.
Using the procedure below, release the roller from the LOCK position and turn
the ribbon feed knob clockwise to take up any ribbon slack. Push in the gray rib-
bon release tabs on the side of the ribbon cartridge to release them, and slide the
roller from the LOCK position to the FREE position.
Preparing the ribbon cartridge
CAUTION:
Do not turn the ribbon feed knob in counterclockwise direction.
Print guide
Print head
Ribbon feed knob
Turn the knob clockwise
Release tabs
Roller