Dascom LA48N/LA48W User Guide - Manual (Page 146)

C-14
Command Sets
Function Command
Barcode Printing
Mnemonic Function Command Remarks
DECBAR Start or Stop Bar ESC % SP 0 Start barcode
Codes ESC % @ Stop barcode
DECSBCA Select Bar Code CSI Ps1 ; Pn2
Attributes ; . . . ; Ps9 ´ q
Parameters Description Values
Ps1 Bar Code System 0, 2 : Code 39
1 : Interleaved 2 of 5
4 : EAN 8
5 : EAN 13
7 : Codabar a/t
8 : Codabar b/n
9 : Codabar c/*
10 : Codabar d/e
11 : UPC-A
13 : Postnet
14 : Industrial 2 of 5
18 : Matrix 2 of 5
Pn2 Width of narrow bars Supported values : 10 (default) -
in Decipoints -15 - 20 - 25 - 30.
Not applicable to UPC, EAN and
Postnet systems.
Pn3 Width of quiet zones Supported value : 180
in Decipoints
Pn4 Width of wide bars Ignored. Set at 2.5 * Pn2.
in Decipoints
Pn5 Ignored
Pn6 Height of bars in Min = 60
Decipoints Max = 2400
Default = 120
Pn7 Ignored
Pn8 Ignored
Ps9 Human Readable 0, 1 : No HRC
Characters 2, 3 , 4 : Print HRC
Ignored for Postnet