Dascom LA48N/LA48W User Guide - Manual (Page 92)

Using Set-Up Mode
5-26
Install Options and Values
Overprinted values are the factory settings.
Install Options Values Description
ENGLISH
DEUTSCH
ESPANOL
FRANCAIS
ITALIANO
Specify a language to be used to print the Set-
Up menu functions and options.
English
German
Spanish
French
Italian
AUTO 1 SEC
AUTO 2 SEC
AUTO 3 SEC
AUTO 4 SEC
AUTO 5 SEC
MANUAL
NO TEAR
Specify the (auto) start timing of tear off
feeding.
1 second after data stops from the computer
2 second after data stops from the computer
3 second after data stops from the computer
4 second after data stops from the computer
5 second after data stops from the computer
Feed the paper for tear-off when the Pause
button is pressed.
Tear off feeding is inhibited under any condi-
tions. Specify this setting for labels that tend to
peel off during backward feeding.
(Single Sheet-
Load)
AUTO 1 SEC
AUTO 2 SEC
AUTO 3 SEC
AUTO 4 SEC
AUTO 5 SEC
MANUAL
Specify the (auto) start timing of single sheet
loading.
1 second after a single sheet is set on the
platen
2 second after a single sheet is set on the
platen
3 second after a single sheet is set on the
platen
4 second after a single sheet is set on the
platen
5 second after a single sheet is set on the
platen
Load a single sheet when the FF/Load button
is pressed.