Dascom LA48N/LA48W User Guide - Manual (Page 85)

Using Set-Up Mode
5-19
8 IN
13.2 IN
13.6 IN
For LA48W only. Specify the physical right
margin.
8-inch page width
13.2-inch page width
13.6-inch page width
(Top-of-Form)
(Top Margin)
## /60 IN
## LINES
Specify the top of form in 1/60 inches (see
“Print Area Definition” in Chapter 3, “Paper
Handling”).
0 to 99
Number of 1/60 inches
1 to 256
Number of the top line
(Bottom Margin)
## LINES
Specify the number of the bottom line (see
“Print Area Definition” in Chapter 3, “Paper
Handling”).
1 to 256 (66)
Number of the bottom line
LF = LF
CR = CR
LF = LF+CR
CR = LF+CR
Specify the effect of LF (Line Feed) and
CR (Carriage Return) codes.
CR=CR: No line feed is added to a car-
riage return.
CR=LF+CR: A line feed is added to each
carriage return.
LF=LF: No carriage return is added to a
line feed.
LF=LF+CR: A carriage return is added to
each line feed.
(Paper Source)
TRACTOR
MANUAL
RESVD 1
RESVD 2
RESVD 1/2
Specify the paper input source. This set-
ting is valid immediately after powering on.
After that, the paper source follows the set-
ting of the paper select lever.
Continuous forms selected
Single sheets selected
Reserved
Reserved
Reserved
Macro1/Macro 2 Values Description